When choosing your bathroom vanity for a remodel, you must keep in mind that the materials you choose and the upgrades you add will impact the unit you would need. There are many bath vanities for sale, and they come in different shapes, sizes, and materials.
Because vanity units are placed in a wet and busy area, you need to carefully consider the right materials to make up your chosen vanity unit. The materials should be able to withstand the moisture and humidity in the environment. In addition, they should not wear out easily nor warp after some time.
It would help if you also kept in mind the function of your unit and that it should meet your specific needs. For example, they should be able to support the weight of the sink and countertop and the fixtures and other elements you would place on top of the unit.
Bathroom remodels are a big undertaking, and it would be wise for you to do your research and spend time weighing your options before purchasing your vanity for your project. Keep on reading to know more about the different materials that are available for your bathroom vanity.
While you can use a variety of woods for your vanity, solid plywood is still the most durable option among the bath vanities for sale. It is sturdy because it is composed of several sheets of wood that are glued together.
Solid plywood vanities bring a traditional and timeless look and are perfect for bathrooms with a traditional design. In addition, the sturdiness of solid wood gives you confidence that you would have the necessary structural support for the weight of your countertop, sink, and other structural elements you would place on top of it.
When properly sealed and lacquered, it can handle moisture and humidity more than other forms of wood. It would help if you kept in mind, though, that while lacquer lasts longer without chipping or flaking than other sealants, it isn’t indestructible. It is particularly susceptible to scratches that might allow moisture penetration to your wood if not removed right away.
Another material that is slowly gaining popularity when making vanity units is particleboard. It is a composite sheet material composed of wood particles mixed with glue which is then heated and pressed into sheets.
To make it sturdier, it is covered in wood veneer, laminate, or melamine. It not only renders extra strength to the material but also lessens the risk of the particleboard being damaged when directly exposed to moisture and steam. However, with constant exposure to steamy conditions in your bathroom, your particleboard will break down eventually.
While it may seem like the cheapest option initially, because of the weak integrity of the material, it might end up costing you more when you have to replace them due to moisture damage.
MDF (Medium Density Fiberboard)
MDF is an engineered material similar to particleboard but is denser and stronger because the wood particles are pressed for a longer time and are exposed to higher temperatures.
MDF tends to be a cheaper material while offering the advantage of not expanding on contracting as with wood. However, because the material is similar to particleboard, exposure to moisture can also make the material expand and must be protected with a good sealant.
Metal is one of the more contemporary and unusual choices for vanity unit material. However, it is enjoying a rapid surge in popularity nowadays as the perfect material for bathrooms with contemporary design because it provides a sleek and modern look.
It is also naturally waterproof, which eliminates the need for additional layers of finish to withstand the effects of moisture and humidity. Another advantage of using stainless steel is that it is resistant to rust and mildew, usually common in humid environments like the bathroom.
However, stainless steel still has a few drawbacks as a material. For example, streaks like watermarks and fingerprints tend to show easily, and you would need to clean your unit more frequently.
There are many factors for you actually to consider when choosing the right material for your bathroom vanity. It would help if you made careful considerations regarding the structural price integrity of the material and how well suited it would be for the environment it will be exposed to.
Career Coach on LPWS, who knows everything about career exposure on LinkedIn. Excellent at building your skills into a seductive LinkedIn profile and school you in self-marketing.