Rub Test Procedure Uses And Explanations

If you understand the need for rub resistant labels on packaging, then you may be somewhat familiar with the Sutherland rub test procedure. The need to ensure labels do not lose their legibility is important in many aspects. 

For instance, it is necessary to ensure prescription labels do not fade over time. This helps protect the consumer as well as the manufacturer. To better understand the need for rub test procedures and how to perform them read further.

It is important to test the durability of products before releasing them onto the market. This is why it is important to utilize the sutherland rub test procedure. The process requires a machine, but the results are easily understood. 

Therefore, the need for training is obsolete and anyone can easily perform the test. All you will need for the test is a label or fabric to be tested. In regards to fabric; this is where a textile designer would ensure their logo will stay in place after multiple uses. This allows for better quality products on the market.

It is important to understand testing variables to obtain optimal results; these variables pertain to speed, weight, and a number of test cycles. It is necessary to adjust the speed to guarantee that your findings are not manipulated because of heat. 

If the label shows great signs of degradation, then consider trying a lower speed. However, if your label shows minimal signs of change, then consider trying a higher speed. It will take some time, but you will sort out your optimum testing variables with trial and error.

Once you have found the proper testing variables for your product you can rest assured that you are supplying a quality label or product for consumers. This means you will supply a label that does not rub away over multiple uses, or a shirt with a logo that does not fade after many washing cycles. This will allow you to gain positive feedback in reference to your product.

A rub test can help you determine the proper ink and substrate combination that will not only save you money but allow you to put your name on products that have been tested and proven to be of high quality. 

This will set you apart from many of the competitors on the market. Once you have familiarized yourself with the rub test procedure there is less trial and error, and you can easily produce quality labels in no time. 

There is no need to worry if your product will withstand multiple uses; especially when you can utilize a testing system that will help you easily see the results for yourself.

If you are a designer of clothes and often use ink, then it is pertinent to use a rub test to ensure your garments will withstand the degradation of wear and wash. It is simple to test how easily the ink bleeds from your garment with a rub test. 

It is hard to earn a well-known name in the fashion industry. Therefore, to set yourself apart it is necessary to test your product before introducing it to the market. All you need is a rub test system, fabric to be tested, and a white piece of fabric to test your garment against. 

This will help you ensure you are only putting your name on a product that has been made to last. This simple factor is often the one thing that decides if a designer will stand the test of time in the fashion world.

Just remember all of your efforts will show when you test your product before putting it on the market. This will help you not only save money but ensure you are only putting the best products out on the market. If you are willing to do a little extra work, then you are ready to stay in business for many years to come.  

 

Comments

0 comments

Leave a Reply

Your email address will not be published. Required fields are marked *