Recessed lights are one of the best ways to provide efficient and adequate lighting while having an overall simple look. The changes are often brought about in new constructions or in houses undergoing renovations. However, one can easily opt to shift to recessed lights by consulting an excellent electrician in Northern California to help with the installation. The services required are minimal and will require less than a day of work if all the necessary equipment is pre-arranged and the budget isn’t to be expanded. The process is easier than you might expect and can be installed anywhere in your house. People have them in washrooms, bedrooms, living areas, closets, kitchens, hallways, backyards, and more. There are a few steps involved in the installation of recessed lights, which are as follows:
Get the right supplies:
The most important three components required for installing recessed lights either by yourself or by consulting an electrician in Northern California are Recessed lights, Drywall saw, and a pre-established lighting system in the house. It doesn’t matter if your house is new or being remodeled, as long as the required light spots have the necessary wiring.
Mark all the required locations and select housing
First and foremost, you have to mark the location where you need to install your new recess light. The lights that you buy will come with a template that you can tape to the ceiling and mark the area of impact. There are two types of recess lights available for installation. Newer lights are a bit bulky and come with a frame that can easily be affixed from above. These lights often opt when there is a lot of space available from above, i.e., the attic. Your home’s insulation contract also plays a part in the overall effect of the project.
Select Baffles, and remove old fix
The inner sheath used to cover the metal is known as a baffle and provides a polished look to the housing. More than often, homeowners use a simple baffle. Electricians in Northern Carolina also suggest that one may opt for simple baffles. Once the baffles and trims are taken care of, get to remove the old fixtures in the wall with the use of drywall saws and other necessary tools.
Cut and connect wires
Remove the old fix in your wall with the help of a saw. It is necessary to cut the junction with a saw from the joist via which it is attached. Make sure that while you are cutting, you do not damage any wires and connect if any of them end up being damaged.
Test power and insert the housing
Before you are mounting the fixture, turn the power on for a while to check if the power is working fine. Once you are certain that the lights are working fine, turn off the main power again. Now carefully start to locate the housing and insert it in. Make sure that it is attached to the ceiling
Attach baffle and trim
The baffle and springs mostly attach to the housing by the use of metal springs. You need to pull those springs out and attach them via holes.
Attach your light
Your setup is almost ready, now that your base is set; you need to opt for a recessed light to go with the base. Select a bulb with a suitable wattage and size. The most common types of bulbs, in this case, are halogen and LED bulbs.
Recessed lights are not a new concept for homeowners. It is also widely used in landscape lighting. Homeowners are recommended to opt for it as it offers many benefits and tons of options to choose from when it comes to choosing between types of bulbs and lights. Switching to recess lights has only rewarded electricians in North Carolina with happy customers in the long run and they aim to keep the streak going.